Weltool W5 Pro Thunderbolt LEP Flashlight (2842m throw, 2.2 million candela)

💡 LEP: Special LEP module, wavelength 400-700nm
🌈 Color Temperature: 6,000-7,000k
🔥 Max Output: 990 lumens
📍 Beam Distance : 2842 meters
🎯 Intensity: 2.2 million candela
⏲️ Max Runtime: 8 hours
🔎 Optics: Stainless steel lens ring, coated tempered glass lens
🖥️ UI: High and low
🔘 Switch: side
💥 Impact: 1m
💧 Water Resistance: IP67
⚖️ Weight : 380±5g (excluding battery and extension tube)
📏 Dimensions: (±0.5mm): (Head diameter) 60.5mm, (Body diameter) 27mm, (Length) 198mm
⚡ Charging: usb-c
🔋 Battery: 2x UB22-19 lithium-ion battery (included)

Instructions:

First, install the battery correctly, with the positive pole of the battery facing the direction of the light head.

The flashlight has a reverse polarity protection function, if the flashlight does not work, please check the battery

Short press the switch to turn on or off the flashlight, and the battery indicator on the switch button will turn on (full battery: green light, low battery: red light, automatically turn off after 5 seconds), and the red light keeps flashing when the battery is ultra-low.

After the flashlight is turned on, press and hold the switch to select the mode, and release the switch to select the current mode that is always on. The default is the high mode every time the flashlight is turned on.

During use, if the battery power is low, the power indicator light will turn off after 5 seconds with a red light, and the indicator light will keep flashing when the battery is extremely low. The flashlight's main light will also flash before the battery is exhausted, and then stop working at any time.

Press the side switch once in the locked state, and the battery indicator light will turn on for 5 seconds (full battery: green light, low battery: red light, ultra-low battery: red light flashing)

Switch lock and unlock functions:

Quickly press the switch more than 4 times in the off state to lock it, and the indicator light on the switch button will flash for 3 seconds to indicate that it has been locked; after locking, the flashlight will remember the locked state, and at this time, it needs to be unlocked when the battery is replaced and used again.

After unlocking, the main light will turn on in high mode.